Wipe the screen surface with a cleaning cloth (not supplied) or an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc.
64
• The camera is taken from an air- conditioned room or car interior to the hot outdoors, etc.
On cleaning
Cleaning the LCD screen or viewfinder
Moisture condensation occurs easily when:
• The camera is brought from a cold location such as a ski slope into a warmly heated room.
Pickup lens
If the camera is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside or outside the camera. Should this occur, “DISC ERROR” appears and the camera will not operate properly.
On pickup lens cleaning
Your camera is designed for use between the temperatures°F toof 32 104 °F (0 °C to 40 °C). Recording in extremely cold or hot places that
exceed this range is not recommended.
When the pickup lens is dirty and the camera cannot read any image, clean
the pickup lens using a commercially
On moisture condensation
available blower.
This may cause serious injuries.
Do not touch the rotating disc
After using your camera at the seashore or other dusty locations Clean your camera carefully. Otherwise, the salty air may corrode the metal fittings or dust may enter t inside of your camera, causing a malfunction.
On operating temperature
Precautions
On handling the camera
Do not carry the camera by holding the disc cover
Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface dry. Do not use any type of solvent such as thinner, alcohol or benzene as this may dama the finish or the casing.
Additional information