®
Getting Started
Owner’s Reference
Location
Isolation
Power Cables
Conditioners
There are several ways to mount either the
We suggest placing either unit near the source equipment you are planning on connecting to its inputs, such as a CD player, turntable and phono preamplifi er, D to A converter etc.
Both units can benefi t from aftermarket isolation devices such as cones, spikes and Sorbothane pads.
Once you have chosen the location for the unit you can use the supplied AC power cord to connect it to the AC wall receptacle or you can use an aftermarket power cord and receptacle.
We strongly recommend the use of a PS Audio xStream Power™ AC cable and a PS Power Port™ AC receptacle to feed the unit. While the supplied power cable is adequate for the task it is not going to provide the best performance. Choosing any xStream Power cable will make a signifi cant performance improvement over the stock power cable.
We recommend the use of power conditioning equipment, such as a PS Audio Power Plant, Duet, Quintet, Soloist or any of the power conditioning equipment from PS. We do not recommend the use of simple AC fi lter power conditioners not made by PS Audio as most of these will ”bleach” the sound and rob the music or video soundtrack of life and dynamics. If you do not use PS Audio power conditioning equipment, you would be advised to plug the GCA Power amplifi er directly into the AC wall receptacle fi rst, then evaluate the sound with and without the power conditioning equipment you intend to use.
4826 Sterling Drive, Boulder, CO 80301 |
|
PH: 720.406.8946 service@psaudio.com www.psaudio.com | Getting Started 1 |
©2006 PS Audio International Inc. All rights reserved.
