PSB Speakers G5C 0250 2/16, 1.0GENERAL 1.1How to use this manual, Symbols, Warranty, G5C Dryers

PSB INDUSTRIES INC. • General Air Division • 1202 West 12th Street, Erie, PA. 16501	G5C Dryers
Phone : 814-45—3651 Fax : 814-454-3492 • www.PSBINDUSTRIES.com • psb@genair.net

1.0GENERAL

1.1How to use this manual

All features of this machine, including information on safety, installation, operation, and maintenance are described in this manual. This manual is an integral part of the machine and must be read and understood by any person involved with its operation or maintenance. In the event of re-sale of this unit, this manual should be forwarded to the new owner. Replacement manuals may be obtained from your authorized dealer.

1.2 Symbols

The symbols below are used throughout this manual, and on the unit itself, to indicate specific unit components or potential safety hazards that will be encountered during machine operation and maintenance.

Air inlet	Condensate drain outlet
Air outlet	Direction of rotation of fan motor
Electric shock danger!

1.3 Warranty

This product has been factory tested before shipment. It is guaranteed to be free from defects in material and/or workmanship for a period of 12 months from the date of shipment. This warranty applies provided the machine has been installed and used in accordance with the instructions detailed in this manual. The manufacturer agrees, at its discretion, to repair or replace all defective parts free of charge. Further, the manufacturer agrees to cover charges associated with field labor required to make authorized warranty repairs, provided the PSB-General Air warranty policy is followed and an S.I.R. authorization is issued by PSB-General Air. Labor coverage shall be limited to maximum rates as published in the latest price list. Field repairs may only be performed by a factory authorized service technician. This warranty is limited to defects associated with operation and manufacture only. All parts subject to wear due to their normal operation are not covered by this warranty. All transportation costs associated with factory repair of equipment are the sole responsibility of the owner.

1.4Standard Equipment

•Refrigerated air drying circuit with economizing heat exchanger & condensate separator.

•Automatic condensate drain system.

•Microprocessor-based control panel with LED display and pushbutton user interface.

•Instruction and maintenance manual with wiring diagram.

1.5Description Of Operation

These dryers have been specially designed to provide dry compressed air, while consuming electrical power in direct proportion to the actual load, thereby saving energy. The dryers utilize mechanical refrigeration, in conjunction with thermal storage, to condense moisture by lowering the compressed air temperature to about 37°F. The dryer “stores” its refrigeration ability during periods of low load by making ice. This allows simple and efficient “on/off” control of the refrigerant compressor to be used for capacity control. An air-to-air economizer is employed to minimize the size of the refrigeration plant and to save electrical energy. Condensed moisture is accumulated in the built-in moisture separator and is discharged through the zero air-loss drain. When the dryer is started it is automatically in the direct expansion mode and cools the compressed air by direct heat exchange with refrigerant. When the sensor temperature drops below setpoint (indicating that the dryer capacity is in excess of the load), the refrigerant solenoid valve is closed, forcing refrigerant through the ice-making circuit only. The dryer continues to run, making ice, for a predetermined time interval after which the refrigerant compressor is switched off. At this time, the LED displays the code “ICE” indicating that the dryer is cooling the compressed air by melting the ice-mass. When the sensor temperature rises sufficiently, indicating that the ice-mass has been depleted, the refrigeration system is re-started and the control cycle is repeated.

ATTENTION: although this dryer is equipped with an on/off switch & internal individual component protection, complete unit

over-current & short circuit protection MUST be provided by the installer, in the user’s power supply, before the dryer.

2/16 Cod. 710.062.01.00 – Rev.08 – 02.05.02