
The minimum length of Codabar messages is set by scanning Option
VE, followed by scanning two digits (01-32) from the Digit Selection
page.
The maximum length of Codabar messages is set by scanning Option
VF, followed by scanning two digits (01-32) from the Digit Selection
page. If the minimum and maximum values are set equal, only codes
of that exact length are read.
The transmission of the STOP/START Characters is enabled by scan-
ning Option VD, or is suppressed by scanning Option VC.
VE Minimum Length (specified by two
digits 01-32)
VF Maximum Length (specified by two
digits 0-32)
VC Disable Transmission *#@ of
START/STOP character
VD Enable Transmission of START/
STOP Character