Teklogix 8570 Vehicle-Mount Computer User Manual 13
Chapter 2: Getting Started
Unpacking The Box
2.1 Unpacking The Box
Please take the time to read this chapter thoroughly to familiarize yourself with the
operation and use of your Teklogix 8570 Vehicle-Mount Computer.

2.1.1 Item Checklist

Check to make sure that all of the following items* were shipped with your 8570
Vehicle-Mount Computer:
The Teklogix 8570 Vehicle-Mount Computer.
Power Cable PN 31619 (attached to the 8570).
One of: AC/DC Power Convertor, Vehicle Pre-regulator, or Power Cable
PN 13985, as ordered:
- AC/DC Power Convertor (with power cord) for use with 8570
Vehicle-Mount Computers installed in fixed locations.
- DC/DC (12V nom, 15-55 or 55-90 volt) Pre-regulator (with Power
Cable PN 13985) for use with 8570 Vehicle-Mount Computes installed
in vehicles.
- Power Cable PN 13985 for use in simple 12 volt installations, where
vehicle has a negative ground power system.
Note: Most electric-powered vehicles have isolated grounds that will require the
use of the DC/DC pre-regulators (see above).
Teklogix 8570 V ehicle-Mount User Manual.
Documentation and licenses for installed software.
Teklogix stylus.
Optional accessories, as ordered.
*Refer to the packing slip for an exact list of items shipped.
The above list contains the standard items which should come with every 8570
Vehicle-Mount Computer. If any of the above items are missing or damaged, please
contact your local Psion Teklogix office. For a listing of worldwide offices, refer to
Appendix A: “Support Services And Worldwide Offices”.
For a list of the standard features of your 8570 Vehicle-Mount Computer, refer to
Table 2.1 on page 14. Optional features and accessories are listed in Table 2.2 on
page 15, and in the Part Numbers list on page 8.