Chapter 6: Troubleshooting
Problems
74 Teklogix 8570 Vehicle-Mount Computer User Manual
6.3 Problems

6.3.1 Display

No Backlight

Boot the unit and increase the brightness control.
Make sure that Suspend is off.

No Video

Verify that the backlight is on, adjust up.
Check that there’s power to the unit.
Verify with a keyboard that the Num Lock LED works.
Make sure that Suspend is off.

Display Quality Poor

Clean the screen.
Adjust the brightness.
Verify with a keyboard that the Num Lock LED works.

6.3.2 Hard Drive

Boot Failure

Check that the Boot Sequence is set correctly in the BIOS Setup (see
page 39).
Important: To use the USB floppy boot feature, USB BIOS Legacy Support
must be enabled., and the Parallel Port must be disabled in the BIOS
Setup.

File Corruption

Run CKPRO, SCAN DISK or CHKDSK and then rebuild or reinstall
as necessary. If you don’t have a keyboard, a DOS virtual keyboard can be
activated by touching the upper left corner of the screen when in DOS.
Then, if you want to reboot in MS-DOS mode from Windows 95, a screen
keyboard will be available to run SCAN DISK or other DOS commands.