Technical Specifications
Decoder | Motorola DSP56366 digital signal processor. |
Surround modes 5.1 channel Dolby Digital and DTS; Dolby Pro Logic/Pro Logic II.
Front panel Power on/off button and LED, separate standby LED. 6 speaker configuration LEDs, for visual display of bass management settings. LEDs show red if channel is outputting bass, or green if bass steering has been applied. Blue negative mode
16 x 2 character LCD Display.
Remote control Master volume, mute, input select, Pro Logic II surround mode select, individual channel delay, individual channel volume, EQ setup (5 band equaliser with ±10 dB range), EQ on/off, Acoustic effects mode select (Hall, Theatre, Stadium, Club or Church) with adjustable reverb levels, load/save preset mode, speaker on/off (for surround, centre and sub), bass management, 60 Hz, 90 Hz or 120 Hz crossover point selection (to apply to all speakers), DRC mode select (none/half/ full dynamic range compression), system test, system reset.
Input connectors S/PDIF coaxial for digital input; S/PDIF optical (Toslink) for digital input; 3 phono stereo inputs (TV, VCR and AUX).
Output connectors 3 pairs of phono connectors for analog audio out: front L, R channels; surround SL, SR (rear channels); centre C and SW subwoofer channel.
Power Supply 230V AC 50 Hz (UK/Europe) via IEC320 connector.
10
