PYLE Audio DISC CD CHANGE instruction manual Error Display

Models: DISC CD CHANGE

1 12
Download 12 pages 45.05 Kb
Page 12
Image 12

ERROR DISPLAY

Error 1: There's no Magazine, and DISC is clamping.

Error 2: It is impossible to discharge Magazine while ejecting.

Error 3: Loading is not completed after a certain time (8 sec) passed.

Error 4: Unloading is not completed after a certain time (8 sec) passed.

Error 5: Elevator does not reach to the target position after a certain time (8 sec) passed. Hole separated.

Error 6: Pickup is not moved to the center area even after a certain time (8 sec) passed in movement of Sled center area.

Error 7: It is not completed despite more than 3 time of Focusing trial.

Error 8: CLV On is not operated to reach CLV constant speed Mode, and Subq input is proven Error.

Error 9: TOC is not read after a certain time (15 sec) passed.

Error 10: The temperature in the mechanism continues to rise for a certain times (5 sec) so no more operation can be done.

Note:

-When the system is turned off in the car power always goes back to the radio, not back to the CD player.

-When power is restored to the CD System. It does not start where it was last playing. It always goes back to the number 1 song on the disc.

-If you want to play a CD, turn the system on via the commander or remote control. If you want to listen to radio or cassette, turn power on via the radio.

www.pyleaudio.com

88-D0020-26

Page 12
Image 12
PYLE Audio DISC CD CHANGE instruction manual Error Display