1.Unscrew the battery cover at the end of microphone, put a 9V battery into compartment with correct polarities, then close the cover.
2.Move "ON/OFF" switch to "ON" position, "PWR" indic ator will light for one s econd and then go off. This indicates correct operation. If it doesn't come on, please check the voltage of battery or polarities. If the "PWR" indicator lights red, this indicates the battery power is low. Please replace with a fresh battery.
| The wireless microphone is not | Turn on the wireless microphone | |
| turned on. | ||
|
| ||
The on air | The microphone receiver is not | Turn on the microphone receiver | |
indicator does | |||
turned on. | and the connected audio equipment | ||
not light up |
|
| |
The microphone receiver is not | Turn on the microphone receiver | ||
| |||
| connected properly. | and the connected audio equipment | |
|
|
| |
| The battery in the wireless | Replace the battery. | |
| microphone is weak. | ||
|
| ||
|
|
| |
| The microphone receiver is not | Turn on the microphone receiver | |
No sound | turned on . | and the connected audio equipment. | |
The connected audio equipment is | Turn on the audio equipment. | ||
| |||
| not turned on. | ||
|
| ||
| The speakers/headphones. are not | Connect the speakers/ | |
| connected to the audio equipment. | headphones | |
| The battery in the wireless | Replace the battery. | |
| microphone is weak. | ||
The sound is |
| ||
|
| ||
distorted | The AUDIO OUT on the receiver | Adjust the volume controls. | |
| is not set correctly. | ||
|
| ||
|
|
| |
| The distance between the wireless | Move the wireless microphone | |
| away from the speakers or | ||
| microphone and speakers are too | ||
A howling noise | change the direction of the | ||
close. | |||
heard from the |
| microphone. | |
speakers. | The battery in the wireless |
| |
| Replace the battery. | ||
| microphone is weak | ||
|
| ||
|
|
|
8
