INSTALLATION

Notes:

•Choose the mounting location where the unit will not interfere with the normal function of the driver.

•Before installing the unit,

connect the wiring temporarily and make sure it is all connected up properly and the system works properly.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

•Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop.

•If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum performance.

30˚

•Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from “Front” (conventional DIN Front- mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis).

For details, refer to the following illustrated installation methods.

TAKE OUT SCREWS BEFORE INSTALLATION

Before installing the unit, please remove the two screws.

Take out screws before installation

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard having an opening as shown below:

53 mm

182 mm

Installing the unit

Be sure you test all connections first, and then follow these steps to install the unit.

1.Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.

2.Disconnect the wire harness and the antenna.

3.Lift the top of the outer trim ring then pull it out to remove it.

4.The two supplied keys release tabs inside the unit's sleeve so you can remove it. Insert the keys as far as they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit.

3

Page 2 Page 4
Page 3
Image 3
PYLE Audio PLCD3MR owner manual Take OUT Screws Before Installation, Din Front/Rear-Mount, Installation Opening
Page 2 Page 4

PLCD3MR specifications

The PYLE Audio PLCD3MR is a state-of-the-art marine stereo system designed to enhance your boating experience with high-quality audio performance. This versatile unit is built to withstand the harsh marine environment, ensuring that you can enjoy your favorite tunes while out on the open water.

One of the key features of the PLCD3MR is its waterproof design. The unit comes with an IPX6 rating, which means it is resistant to water splashes and rain, making it ideal for use on boats, jet skis, and other marine vehicles. This durability ensures that you can enjoy music without worrying about water damage, providing peace of mind during your adventures.

The PLCD3MR is equipped with a built-in Bluetooth receiver, allowing for seamless wireless audio streaming from smartphones, tablets, and other Bluetooth-enabled devices. This feature provides unparalleled convenience, as users can easily connect their devices to the stereo without the hassle of wiring, making it simple to access playlists and streaming services while on the go.

In addition to Bluetooth connectivity, the stereo also features an AM/FM radio and a USB port for playing music directly from USB flash drives. This versatility means you can enjoy a wide range of audio options, whether you prefer streaming your favorite songs or listening to the radio while navigating the open waters.

Another notable characteristic of the PYLE Audio PLCD3MR is its strong output power. The unit delivers up to 240 watts of total output, ensuring that your music can be heard clearly even in noisy environments, such as when the wind is blowing or the engine is running. The adjustable EQ settings allow you to customize your sound to fit your preferences, ensuring that you achieve optimal audio performance.

The PYLE Audio PLCD3MR also comes with a user-friendly interface, complete with a bright and clear LCD display that makes it easy to read, even in bright sunlight. The rotary knob and button controls provide a straightforward way to navigate through your audio options.

In summary, the PYLE Audio PLCD3MR offers impressive features such as Bluetooth connectivity, waterproof design, versatile audio options, strong power output, and user-friendly controls, making it an excellent choice for anyone looking to enhance their boating experience with high-quality sound. Whether you are cruising along the coast or anchored in a serene cove, the PYLE Audio PLCD3MR is sure to elevate your enjoyment on the water.
Top Page Image Contents