INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan or Toyota, follow these mounting instructions.
Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
Side view showing
Screw Holes marked T, N
Factory Radio | Screw | |
Mounting | ||
| ||
Bracket |
|
Screw
Dashboard or
Console
To fasten the unit to the factory radio mounting brackets.
Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: the outer trim ring, sleeve and the metal strap are not used for method B installation.
5
