Remote Control
Ref # | Button | Function | |
|
|
| |
24 | These buttons are used for numeric entry in many different menus. | ||
In addition, in Radio Mode (when RDS is engaged), 0 serves as | |||
|
| ||
|
| the TA button and 9 serves as the AF button. | |
|
|
| |
25 | +10 | This button is used with the other number buttons for use with | |
|
| ||
|
|
| |
26 | Six numbered preset buttons store and recall stations for each band. | ||
|
|
|
Preparing the Remote Control
Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver).
Operation angle: About 
30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation .
