REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new battery. Make sure that the positive and negative terminals of the battery are oriented as indicated.
3.Close the cover.
Battery: a button cell lithium battery (CR2025 3V)
Using the Remote Control
Point the remote control towards the player front face remote sensor IR (remote control signal receiver). Operation angle: About ± 30 degree in each the direction of the front of the remote sensor.
LOADING/EJECTING A DISC
Loading a Disc
When all connections have completed, you can load a disc as follow:
1.Turn the ignition on to the accessory position.
2.Press the PWR/ILL button on the front panel or POWER/ILL button on the remote control to turn on the unit.
3.Press OPEN button on the front panel to fold down the panel.
Open button 
4.Insert the disc with printed side facing up into the disc slot.
5.The player will start playback automatically.
Ejecting a Disc
When the front panel is folded down, press 
button on the back of the front panel to eject the disc.
14
