OPERATION
RADIO OPERATION SWITCHING TO RADIO MODE
Press MODE on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency.
SELECTING THE FREQUENCY BAND During radio mode, shortly press MENU (BAND) button on the front panel or BND (MENU) button on the remote control to select the desired band. The reception band will change in the following order:
FM1 
FM2 
FM3 
AM1 
AM2 
SELECTING STATION
Press 
/ 
buttons on the remote control or 
/ 
buttons on the front panel shortly to activate automatic seek function. Press and hold 
/ 
buttons for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected.
Then shortly press 
/ 
buttons to increase or decrease frequency by one step of channel spacing, hold the buttons longer for fast tuning. If both buttons have not been pressed for several seconds, it will return to seek tuning mode and “AUTO” appears on the display.
Shortly press
/
buttons on the remote control or 
/ 
buttons on the front panel to increase or decrease frequency by one step of channel spacing. The frequency is updated correspondingly on display.
LOCAL/DISTANT
Press and hold ST/LOC/TITLE button on the front panel or ST/TITLE button on the remote control for several seconds to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.
AUTOMATIC MEMORY STORING & PROGRAM SCANNING
-Automatic memory storing
Press and hold AMS button on the front
panel or on the remote control for several seconds, the radio searches from the FM1 the initial frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
-Program scanning
Press AMS button shortly to scan preset station.
STATION STORING
Press any one of the preset buttons (1 to
6)on the front panel to select a station, which had been stored inthe memory. Press this button for several seconds, current station is stored into the number button.
MONO/STEREO
Press ST/LOC/TITLE button on the front panel or ST/TITLE button on the remote control shortly to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.
SCAN
Press MUT/ENT button on the front panel shortly to set function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds.
16
