Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna LZ6130C, LZ7230C, LZ7230, LZ6127 manual Blade switch, Ignition Switch, Fuses, Controls

Models: LZ30, LZ30C LZ5227, LZ6130 LZ6130C, LZ7230C LZ7230, LZ6127

1 77

Download 77 pages 3.95 Kb

Page 21

Image 21

CONTROLS

Blade switch

To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully.

8011-510

Blade Switch

Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

WARNING!

Do not run the starter for more than ﬁve seconds each time. If the engine does not start, wait 10 seconds before retrying.

Fuses

The fuses are located in a holder to the left of the hydraulic tank. They are ﬂat pin fuses of the same type used in automobiles.

There are three fuses as well as a socket for one spare fuse.

Fuse ratings and functions:

•20 A, Primary fuse.

•7.5 A, Mower deck coupling.

•7.5 A, Accessory outlet.

•Socket for spare fuse.

8011-748

Ignition Switch

8011-746

Fuses

English-21

Page 21

Image 21

Husqvarna LZ6130C, LZ7230C, LZ7230, LZ6127, LZ5227, LZ6130, LZ30, LZ30C manual Blade switch, Ignition Switch, Fuses, Controls

Contents

English Operator ManualPage CONTENTS TROUBLESHOOTING GUIDEDriving and Transport on Public Roads English-4 Congratulations INTRODUCTIONGeneral Driving and Transport on Public RoadsManufacturing Number Good ServicePlease have these available when ordering spare parts INTRODUCTIONXxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx SYMBOLS AND DECALSIMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxxxx xxxxxxxxxremove safety SYMBOLS AND DECALSremove key before ManualSAFETY Safety InstructionsGeneral Operation Operate machine only in daylight or good artiﬁcial light SAFETYPersonal Safety Equipment Slope OperationSAFETY Children SAFETYRisk for burns if touched The engine and the exhaust system, become very hot during operationSAFETY Safe Handling of GasolineGeneral Maintenance Use protective glasses for maintenance workSAFETY SAFETY Risk of sparkingEnglish-15 Customer responsibilities TransportIMPORTANT INFORMATION SAFETYSpark Arresters Roll over Protection system ROPSSAFETY English-17Controls CONTROLSMotion Control Levers CONTROLS1. Forward 2. Neutral 3. Neutral slot, Neutral lock 4. Reverse Tracking knob Hour meterParking Brake CONTROLSIgnition Switch Blade switchFuses CONTROLSCONTROLS RefuelingThe engine and the exhaust system, become very hot during operation Risk for burns if touchedSeat Lock Seat adjustment leverFuel shut off valve Lengthways adjustmentThrottle control Choke controlLifting Lever for the Mower Deck CONTROLSCutting height lift pedal AccessoriesPump release valves Only rotate the valve ¼ to ½ turn to release the systemOperation OPERATIONTraining SteeringThe seat belt must be used when the roll bar is in upright position Roll bar and safety beltBefore Starting Starting the EngineDepress the control for disengaging the mower deck OPERATIONSteering controls in the outward, locked neutral position Set the throttleSet the choke control OPERATIONOpen the fuel valve Turn to the start positionOPERATION IMPORTANT INFORMATIONMOWING no choke OPERATION To start an engine with a weak batteryIMPORTANT INFORMATION To attach jumper cablesEnsure that no one is near mower when engaging blade switch The mower deck’s gauge wheels should be evenly adjustedRunning OPERATIONOperating on hills OPERATIONIMPORTANT INFORMATION OPERATION Mowing TipsStopping the Engine No adjustments or maintenance to be carried out unlessMoving by Hand the engine stopped the ignition key removedMAINTENANCE English-37 MAINTENANCEAlways use protective glasses when handling the battery BatteryAlways use two wrenches for the terminal screws MAINTENANCEIgnition System Safety SystemFitting the wrong spark plug type can damage the engine MAINTENANCESafety system MAINTENANCEStart motor WorksThrottle Cable Engine Cooling Air IntakeChoke Cable MAINTENANCEAir Filter Do not use compressed air to clean the air ﬁlterFilter should be assembled dry and not be oiled MAINTENANCEEngine Oil Cooler MAINTENANCEIMPORTANT INFORMATION Fuel Filter Fuel Pump Air FilterMAINTENANCE Deck belt Checking the V-beltsMAINTENANCE To replace deck beltPump belt Faulty adjustment of the parking brake can cause an accidentChecking Tire Pressures Checking the Parking BrakeChecking the Blades Blade replacementDo not use a lower grade hardware than speciﬁed MAINTENANCEAdjusting Cutting Height Adjusting the Mower DeckBefore performing any service or adjustment checklist 2. Place the Blade switch in the disengaged positionUse protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLUBRICATION Lubrication ScheduleGeneral Shaft Bushings and Linkage Lubricating the CablesLubricating with the Lubrication Schedule LUBRICATIONLUBRICATION Avoid skin contact wash with soap and water in case of spillsIMPORTANT INFORMATION IMPORTANT INFORMATIONChecking the Oil Level LUBRICATIONIMPORTANT INFORMATION Oil Type Oil RecommendationsLUBRICATION IMPORTANT INFORMATIONLubricating the cutting height adjuster Mower Deck Height AdjusterLUBRICATION Throttle and Choke Cables, Lever BearingsSteering Control Shafts LUBRICATIONMower Deck Struts Changing the Oil FilterTROUBLESHOOTING GUIDE ProblemCause English-58 TROUBLESHOOTING GUIDEService STORAGEWinter Storage For unit produced before Serial No WIRING DIAGRAMSFor Serial No. 074439861 and after English-60LZ5227 TECHNICAL DATALZ6127 EngineEnglish-62 TECHNICAL DATAEnglish-63 TECHNICAL DATAEnglish-64 TECHNICAL DATAEnglish-65 TECHNICAL DATATECHNICAL DATA Torque SpeciﬁcationsAccessories Head lights BioClip attachment Mulch clip Collection systemCONFORMITY CERTIFICATES Conformity Certiﬁcates USA requirementsCE requirements SERVICE JOURNAL Service JournalDelivery Service SERVICE JOURNAL After the First 5-8 Hours1. Change engine oil English-69SERVICE JOURNAL 25-Hour Service3. Check the tire pressures 4. Check battery with cables 5. Lubricate according to lubrication chartSERVICE JOURNAL 50-Hour Service1. Perform the 25-hour service 3. Change engine oil 4. Lubricate according to lubrication chartSERVICE JOURNAL 100-Hour Service1. Perform the 25-hour service 2. Perform the 50-hour service 3. Change the engine oil ﬁlter 4. Clean/replace the spark plugsSERVICE JOURNAL 300-Hour ServiceSERVICE JOURNAL At Least Once Each YearEnglish-75 SERVICE JOURNALSECTION 1 LIMITED WARRANTY WARRANTY STATEMENTSECTION 2 HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY SECTION 6 PROCEDURE TO OBTAIN WARRANTY CONSIDERATION08/23/07 539 131254 R01