SAFETY
•Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition.
•Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.
•Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.
•Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery.
Do not smoke when performing maintenance on the battery. The battery can explode and cause serious injury/damage.
WARNING!
Avoid electrical sparking and its consequences by the following routines:
• | Use protective goggles. |
|
• | Ensure that the fuel filler cap is mounted tightly |
|
| and no flammable substances is stored in an |
|
| open vessel. |
|
• | Never work with the starter circuit if there is |
|
| spilled fuel. |
|
• | Disconnect the chassis cable from the battery |
|
| first and reconnect it last. |
|
• | Do not make a bridge short circuit across the |
|
| starter relay to run the starter. |
|
• Never use the machine indoors or in spaces |
| |
| lacking proper ventilation. The exhaust fumes |
|
| contain carbon monoxide, an odorless, |
|
| poisonous, and lethal gas. |
|
• | Stop and inspect the equipment if you run over | |
or into anything. If necessary, make repairs | Risk of sparking |
before starting. |
|
•Never make adjustments with the engine running.
•The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine.
