OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. Avoid idling the engine for longer periods, as there is a risk of the spark plugs fouling.
1.Disengage the mower deck by depressing the blade switch.
2.Raise the mower deck by pulling the lifting lever backward to the transport position.
3. When the machine is standing still, activate the parking brake by pulling the lever backward.
4.Move the throttle to the minimum position (tortoise symbol). Turn the ignition key to the stop position. Never use the choke to stop the engine.
5.Move the steering controls outward.
6.Remove the key when leaving the mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other position than “OFF” will cause the battery to be discharged and the hour meter to accumulate hours.
Moving by Hand
When pushing or pulling the mower with the engine turned off,the vent screws on both hydraulic pumps must be opened ¼ - ½ turn.
WARNING!
No adjustments or maintenance to be carried out unless:
•the engine stopped
•the ignition key removed
•the parking brake activated
Disengaging the mower deck
Raise the mower deck
Vent screws on the hydraulic pump
