Summit 42369 dimensions BUILT-IN LP GAS Grill Installation Guide, Locating Your Grill

SUMMIT®

PLATINUM D4 , D6

BUILT-IN LP GAS GRILL INSTALLATION GUIDE

42369

LOCATING YOUR GRILL

THIS GAS APPLIANCE IS DESIGNED

FOR OUTDOOR USE ONLY.

When determining a suitable location for your Summit® gas grill installation, give attention to concerns such as exposure to wind, proximity to traffi c paths, and keeping any gas supply lines as short as possible. Never locate the Summit® gas grill in a garage, breezeway, shed, under an unprotected overhang, or other

enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fi re.

CLEARANCE FROM SURFACES OR STRUCTURES

24 inches (61 cm) Any Surface

WARNING: Clearance from any surface or structure is 24 inches (609.6 mm) from the back and sides of the grill. Refer to “Typical Gas Supply Installation” before starting installation.

WARNING: The structure, “island”, countertops, and adjacent work areas for the built-in grill installation must be built from noncombustible materials only.

NOTE: If you have questions on what materials are considered noncombustible, contact your local building materials supplier or fire department.

Any
Surface	24inches (61cm)
		27 inches (685.8 mm) min. for
		lid clearance
			Grill Frame

Note: For a countertop treatment: Recommended 3/4 inch (19.1 cm) overhang. Notch front edge for frame to fully slide in.

	Any
24 inches (61 cm)	Surface

BUILT-IN STRUCTURE CUTOUT DIMENSIONS ALL DIMENSIONS ARE TO FINISHED SURFACES.

3

2

1

WARNING: All countertop finished surfaces must be constructed of a noncombustible material.

Built-In Cutout Dimensions

	D4	D6	Tolerances
1	30 1/4˝	38 1/4˝	+ 1/4” - 1/4˝
2	34 1/4˝	34 1/4˝	+ 1/4”	- 1/4˝
3	21˝	21˝	+ 1/4”	- 1/4˝

42369 US 11/22/05

LP