Husqvarna LZ7230, LZ6127, LZ6130C, LZ7230C, LZ5227, LZ6130, LZ30, LZ30C manual Maintenance

Models: LZ30, LZ30C LZ5227, LZ6130 LZ6130C, LZ7230C LZ7230, LZ6127

1 77
Download 77 pages 3.95 Kb
Page 36
Image 36
MAINTENANCE

MAINTENANCE

 

Daily

 

Weekly

 

At

 

Maintenance interval

 

 

 

 

 

 

 

 

 

 

least

 

 

in hours

 

 

 

 

 

 

once

 

 

 

 

 

Maintenance

Before

After

 

 

 

each

 

 

 

 

 

 

 

 

 

 

 

 

 

 

year

 

25 50 100 300

 

 

 

 

 

 

 

Check the parking brake

z

 

 

 

 

 

 

 

 

 

 

Check the engine’s oil level (every refueling)

z

 

 

 

 

 

 

 

 

 

 

Check the hydraulic system’s oil level

z

 

 

 

 

 

 

 

 

 

 

Check the safety system

z

 

 

 

 

 

 

 

 

 

 

Check for fuel and oil leakages

‹

 

 

 

 

 

 

 

 

 

 

Check rubber valve for sand trap

 

z

 

 

 

 

 

 

 

 

 

Check/clean the engine’s cooling air intake

 

z

 

 

 

 

 

 

 

 

 

Check the mower deck

 

z

 

 

 

 

 

 

 

 

 

Check hardware (screws, nuts, etc.)

 

z

 

 

 

 

 

 

 

 

 

Clean under the mower deck

 

z

 

 

 

 

 

 

 

 

 

Start the engine and blades, listen for unusual sounds

 

‹

 

 

 

 

 

 

 

 

 

Check for damage

 

‹

 

 

 

 

 

 

 

 

 

Thoroughly clean around the engine

 

‹

 

 

 

 

 

 

 

 

 

Thoroughly clean around the hydraulic system

 

‹

 

 

 

 

 

 

 

 

 

Clean around belts, belt pulleys, etc.

 

‹

 

 

 

 

 

 

 

 

 

Check the tire pressures

 

 

 

 

 

 

 

‹

 

 

 

Check battery

 

 

 

 

 

 

 

z

 

 

 

Sharpen/Replace mower blades

 

 

 

 

 

 

 

z

 

 

 

Check the fuel pump’s air filter 2)

 

 

 

 

 

 

 

z

 

 

 

Clean the engine’s cooling air intake 2)

 

 

 

 

 

z

 

z

 

 

 

Clean cyclon air filter dust cap

 

 

 

 

 

z

 

 

 

 

 

Check/adjust the parking brake

 

 

 

 

 

‹

 

 

‹

 

 

Inspect muffler/Spark arrester

 

 

 

 

 

‹

 

 

‹

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1)First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) Performed by authorized service workshop.

z= Described in this manual

‹= Not described in this manual

English-36

Page 36
Image 36
Husqvarna LZ7230, LZ6127, LZ6130C, LZ7230C, LZ5227, LZ6130, LZ30, LZ30C manual Maintenance