Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna LZ7230, LZ6127, LZ6130C, LZ7230C Hour meter, Tracking knob, Parking Brake, Controls

Models: LZ30, LZ30C LZ5227, LZ6130 LZ6130C, LZ7230C LZ7230, LZ6127

1 77

Download 77 pages 3.95 Kb

Page 20

Hour meter

CONTROLS

Hour meter

The hour meter displays the total operating time.

It will ﬂash CHG OIL (Change Oil) at 50 hour intervals. The ﬂash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter cannot be manually reset.

Tracking knob

The tracking knob is located in front of the left control lever. Rotating the knob allows ﬁne tuning adjustments so that the machine tracks straight with the motion control levers in the full forward position.

Rotate the knob clockwise (as viewed from the operating position) to increase the speed or counter clockwise to decrease the speed on the left control lever. For example: if the control levers are full forward and the unit turns to the right, turn the tracking knob counter clockwise to decrease the speed on the left control lever.

Parking Brake

The parking brake is found below the operator's left hand. Pull the lever backward to activate the brake and push forward to release it.

IMPORTANT INFORMATION

The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower.

8011-749

Hour meter

8011-442

Tracking knob

8011-511-1

Parking brake not activated

English-20

Image 20

Husqvarna LZ7230, LZ6127, LZ6130C, LZ7230C manual Hour meter, Tracking knob, Parking Brake, Controls, Important Information

Contents

Operator Manual EnglishPage Driving and Transport on Public Roads CONTENTSTROUBLESHOOTING GUIDE English-4 INTRODUCTION CongratulationsGeneral Driving and Transport on Public RoadsGood Service Manufacturing NumberPlease have these available when ordering spare parts INTRODUCTIONSYMBOLS AND DECALS Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxxIMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxxxx xxxxxxxxxSYMBOLS AND DECALS remove safetyremove key before ManualGeneral Operation SAFETYSafety Instructions SAFETY Operate machine only in daylight or good artiﬁcial lightSAFETY Personal Safety EquipmentSlope Operation SAFETY ChildrenThe engine and the exhaust system, become very hot during operation Risk for burns if touchedSAFETY Safe Handling of GasolineSAFETY General MaintenanceUse protective glasses for maintenance work English-15 SAFETYRisk of sparking Transport Customer responsibilitiesIMPORTANT INFORMATION SAFETYRoll over Protection system ROPS Spark ArrestersSAFETY English-17CONTROLS Controls1. Forward 2. Neutral 3. Neutral slot, Neutral lock 4. Reverse Motion Control LeversCONTROLS Hour meter Tracking knobParking Brake CONTROLSBlade switch Ignition SwitchFuses CONTROLSRefueling CONTROLSThe engine and the exhaust system, become very hot during operation Risk for burns if touchedSeat adjustment lever Seat LockFuel shut off valve Lengthways adjustmentChoke control Throttle controlLifting Lever for the Mower Deck CONTROLSAccessories Cutting height lift pedalPump release valves Only rotate the valve ¼ to ½ turn to release the systemOPERATION OperationTraining SteeringRoll bar and safety belt The seat belt must be used when the roll bar is in upright positionBefore Starting Starting the EngineOPERATION Depress the control for disengaging the mower deckSteering controls in the outward, locked neutral position Set the throttleOPERATION Set the choke controlOpen the fuel valve Turn to the start positionMOWING no choke OPERATIONIMPORTANT INFORMATION To start an engine with a weak battery OPERATIONIMPORTANT INFORMATION To attach jumper cablesThe mower deck’s gauge wheels should be evenly adjusted Ensure that no one is near mower when engaging blade switchRunning OPERATIONIMPORTANT INFORMATION Operating on hillsOPERATION Mowing Tips OPERATIONNo adjustments or maintenance to be carried out unless Stopping the EngineMoving by Hand the engine stopped the ignition key removedMAINTENANCE MAINTENANCE English-37Battery Always use protective glasses when handling the batteryAlways use two wrenches for the terminal screws MAINTENANCESafety System Ignition SystemFitting the wrong spark plug type can damage the engine MAINTENANCEMAINTENANCE Safety systemStart motor WorksEngine Cooling Air Intake Throttle CableChoke Cable MAINTENANCEDo not use compressed air to clean the air ﬁlter Air FilterFilter should be assembled dry and not be oiled MAINTENANCEIMPORTANT INFORMATION Engine Oil CoolerMAINTENANCE MAINTENANCE Fuel FilterFuel Pump Air Filter Checking the V-belts Deck beltMAINTENANCE To replace deck beltFaulty adjustment of the parking brake can cause an accident Pump beltChecking Tire Pressures Checking the Parking BrakeBlade replacement Checking the BladesDo not use a lower grade hardware than speciﬁed MAINTENANCEAdjusting the Mower Deck Adjusting Cutting HeightBefore performing any service or adjustment checklist 2. Place the Blade switch in the disengaged positionCleaning and Washing Use protective glasses when cleaning and washingCaster Wheels HardwareGeneral LUBRICATIONLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating with the Lubrication Schedule LUBRICATIONAvoid skin contact wash with soap and water in case of spills LUBRICATIONIMPORTANT INFORMATION IMPORTANT INFORMATIONIMPORTANT INFORMATION Checking the Oil LevelLUBRICATION Oil Recommendations Oil TypeLUBRICATION IMPORTANT INFORMATIONMower Deck Height Adjuster Lubricating the cutting height adjusterLUBRICATION Throttle and Choke Cables, Lever BearingsLUBRICATION Steering Control ShaftsMower Deck Struts Changing the Oil FilterCause TROUBLESHOOTING GUIDEProblem TROUBLESHOOTING GUIDE English-58Winter Storage ServiceSTORAGE WIRING DIAGRAMS For unit produced before Serial NoFor Serial No. 074439861 and after English-60TECHNICAL DATA LZ5227LZ6127 EngineTECHNICAL DATA English-62TECHNICAL DATA English-63TECHNICAL DATA English-64TECHNICAL DATA English-65Torque Speciﬁcations TECHNICAL DATAAccessories Head lights BioClip attachment Mulch clip Collection systemCE requirements CONFORMITY CERTIFICATESConformity Certiﬁcates USA requirements Delivery Service SERVICE JOURNALService Journal After the First 5-8 Hours SERVICE JOURNAL1. Change engine oil English-6925-Hour Service SERVICE JOURNAL3. Check the tire pressures 4. Check battery with cables 5. Lubricate according to lubrication chart50-Hour Service SERVICE JOURNAL1. Perform the 25-hour service 3. Change engine oil 4. Lubricate according to lubrication chart100-Hour Service SERVICE JOURNAL1. Perform the 25-hour service 2. Perform the 50-hour service 3. Change the engine oil ﬁlter 4. Clean/replace the spark plugs300-Hour Service SERVICE JOURNALAt Least Once Each Year SERVICE JOURNALSERVICE JOURNAL English-75WARRANTY STATEMENT SECTION 1 LIMITED WARRANTYSECTION 2 HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY SECTION 6 PROCEDURE TO OBTAIN WARRANTY CONSIDERATION539 131254 R01 08/23/07