MAINTENANCE
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage.
Throttle Cable
Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, locate the engine cables mounted under the air filter housing. The throttle cable sits on the right side of the engine.
1.Loosen the clamping screw for the cable’s outer casing and move the throttle to the full throttle position.
2.Check that the throttle cable is mounted in the middle hole in the throttle lever.
3.Push the throttle cable’s outer casing as far to the left as possible and tighten the clamping screw.
Check and clean the cooling air intake
Choke Cable
If the engine produces black smoke or is difficult to start, this can be because the choke cable is incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as follows:
1.Loosen the clamping screw for the cable’s outer casing and move the choke lever to the full choke position.
2.Check that the choke cable is mounted in the upper lever, see illustration. Push the choke cable’s outer casing as far to the right as possible and tighten the clamping screw.
