OPERATION
Remote Sensor
There is a remote sensor on the front panel. On the monitor, there is another remote sensor to receive remote control signal. You can point the remote control handset to the remote sensor on the front panel (when the monitor doesn't stretch out) or the remote sensor on the monitor panel (when the monitor stretches out) and press function keys on the remote control to control the DVD unit.
The unit is also connected to an external remote receiver (See the electrical connection diagram above), and the function is the same with the remote sensor on the front panel or on the monitor panel.
Notes:
The external remote receiver is placed near the monitor for the best to receiver remote signal easily.
If the angle of the monitor from vertical exceeds 30 (Especially the distance exceeds 3m.), controlling the DVD unit through the remote sensor on the front panel cannot get good effect. You are suggested to use the external remote. receiver
6.5 Inch TFT Display
When the monitor stretches out, the 6.5 inch color TFT display can show the current state of the unit.
Volume Level Adjustment
Press VOLUME+/- on the monitor panel of the unit or VOLUME +/- on the remote control to increase or decrease the volume level.
Mode Selection
press MODE button on the remote control to select among DVD, AV1, AV2 and RGB mode.
Reset
Reset button is placed on the front panel and must be activated with either
a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Picture mode Adjustment
Press PICTURE button on the monitor panel, the picture mode will show on the display, repeatedly press PICTURE button to select among BRIGHT, CONTRAST, COLOR, TINT (For the unit with NTSC system) and SCREEN.
(For the unit with NTSC system):
PICTURE
BRIGHT32
CONTRAST 32
COLOR32
TINT32
SCREEN 16:9
Press VOLUME+/- buttons on the monitor panel or VOLUME+/- buttons on the remote control to adjust the selected item. The corresponding value will show on the display.
17
