PYLE Audio PLTS73FX owner manual Preparing the Remote Control, Enter

Remote Control

Ref#	Button	Function
23	ENTER	This button is used to confirm selections and settings within
		many of the menus in the OSD system.
24	�	In DISC mode, press itto reverse rapidly
		Use to input numerical values during programming, with the GOTO
25	0-9	button, or to directly select a track to play .
		In Radio mode, (when the RDS engaged,),0 serves as TAfunction,
		9 serves as the AF function .
26	+ 10	This button is used with the other number buttons for use with
		two-digit number entries.
27	1 -6	Six numbered preset buttons store and recall stations for each band

Preparing the Remote Control

Inserting the Battery

1 .First push to inside as the direction indicated by the arrow (See 0 )And then Remove the battery holder as the direction indicated by the arrow (See f) ).

2.Replace the battery Set a new battery property with (+ )side up as illustrated (See @ ).

3.lnsert the battery holder. Push in the holder to the original position(See e).

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal receiver).

Operation angle: About ± 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation .