TUNING (TV-AUTO SEARCH)
1.After adjust TV system(Field/Standard) on
*‘Searching’ will be blinking as it searches TV channels and channel number is changing as it searches TV channels.
2.When
TUNING (RADIO-AUTO SEARCH)
1.After adjust Radio system (Band/Freq. Step) on
*‘Searching’ will be blinking as it searches Radio channels and channel number is changing as it searches RADIO channels.
2.When Auto - Search is completed, memorized channels will be shown on the screen and cursor will be placed on the first channel as below. The next channels will be shown on the next screen by pressing BAND button.
BASIC OPERATION
OVERVIEW OF THE RDS FUNCTION
AF (Alternative Frequencies) / REG (Regional)
When pressed short, AF switching mode is selected and the state of AF switching mode is displayed by AF segment in LCD.
Segment off : AF switching mode off
Segment on : AF switching mode on : Has RDS information.
Segment flashing : AF switching mode is selected, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of current station, from a few minute for strong station to a few seconds for weak station.
Every time that new AF is stronger than current station, it switches over to that frequency in short time. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program.
When pressed long, it is activated of regional mode on/off.
Regional mode on : AF switching or PI SEEK is implemented to the station which has all PI codes are the same as current station. REG of individual segment is turned on also together with displaying "REG ON" on numeric display for a few seconds.
24
