INTRODUCTION
4. BATTERY
Preparing & Using The Remote Control
BATTERY INSTALLATION
NOTICE (BATTERY)
PLEASE FOLLOW THE INSTRUCTIONS
BELOW. INCORRECT BATTERY USEAGE
MIGHT CAUSE EARLY DISCHARGE, LEAKAGE
OR CORROSION DAMAGE.
*Do not insert battery in the wrong direction. Be sure to observe the correct polarity
*It is dangerous to charge/heat/open or short circuitry the battery.
*Please remove the battery in case of not using the remote control for a long period of time.
*It is time to replace the battery if the remote control does not work properly or if the operating range becomes reduced.
*Should battery leakage occur, clean the battery compartment with a soft cloth and replace with a new battery.
USING THE REMOTE CONTROL
NOTICE (REMOTE CONTROL)
The remote control should be pointed at the remote sensor in order for the Unit Monitor to function correctly.
Distance: Maximum of 16 feet from the front of the remote sensor.
Angle: Approximately 30 from center.
Please do not locate the Unit where direct sunlight or fluorescent illumination might shine directly at the remote sensor. This will interfere with proper remote control operation.
*The remote control should be aimed directly towards the remote sensor of the Unit.
*Avoid dropping the remote control.
*Avoid spilling liquids on the remote control or exposing it to extreme heat.
10
