Features and Controls: PYD1942 Mixer
Presetting the Controls Before Use
Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust
MIC 1 Combo Input Jack For connecting a balanced or unbalanced low impedance microphone with XLR- type or 1/4” plug
MIC 2 Input Jack (on input panel) For connecting a balanced or unbalanced low impedance microphone with 1/4” plug
MIC Frequency Kill Switches Allows you to kill the selected frequency range instantly for interesting effects. LED lights to indicate kill is activated.
MIC Talkover Allows you to lower the level of the input sources so you can talk them using the DJ Mic
MIC1/2 Level Controls Lets you control the MIC levels as they enter the mix
MIC1/2 Tone Controls
Channel Gain Control Lets you adjust the gain of the input source
Channel Input Selector Lets you choose the input source to play for each channel
Channel CUE Switch Allows you to monitor the selected audio input source and prepare it prior to mixing it in.
Dual Display Meter Indicates the levels of Left and Right Master
Channels
Master Level Control Lets you control mixer’s overall volume level
Master Mono/Stereo Selector
Master Balance Control
Zone Balance Control
Zone Mono/Stereo Selector
Zone Level Control Lets you control the mixer’s overall ZONE volume level, if you set up remote speakers or DJ booth monitors
BNC Lamp Adaptor Allows you to connect a 12V/3W lamp to light the panel
Power Switch
Equalizer On/Off Switch
Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler, etc. and either play the signal from it or play another input through it.
Headphone Level Control
Headphone Jack Accepts headphones with 1/4” plug
Headphone CUE/PGM Control Allows you to listen simultaneously or separately to the CUE material or the active program
ECHO Delay Control Lets you adjust the delay time for the echo
ECHO Repeat Control Lets you control the time period during which the echo is repeated
ECHO Level Control Controls the depth of the echo effect
ECHO On/Off Switch
Sound Effect CUE Switch Lets you monitor the selected sound effect before mixing it in
Sound Effect Volume Control Lets you control the volume level of the sound effect within the mix
Sound Effect Speed Control Lets you control the pitch of the selected sound effect
Digital Sound Effects Selectors Lets you create special sound performance mixes from the eight preprogrammed special effects
Channel Assign Switch Lets you select the input source to be mixed by the Crossfade Slider Control
Crossfade Slider Control Allows you to smoothly switch between the input sources assigned to Channel A and Channel B
the mixer’s controls BEFORE connecting AC power or turning on the unit. Set up the mixer controls like this before you start:
CONTROL |
| SETTING |
| ||
Power On/Off |
| OFF |
Balance |
| MID |
Gain |
| MID |
Tone Controls, Treble, Mid & Bass |
| 0 |
MIC 1/2, CH 1/2/3/4, Master & Cue Levels |
| 0 |
Crossfader |
| CENTER |
Connecting the Mixer Inputs
This mixer permits connection of up to eight (8) audio input sources,and two microphones. Such a system might include, for example:
Two Microphones | Two Microphones | Two Microphones | Two Microphones | |
Two Turntables | Eight CD players | Two Turntables | Two Turntables | |
Six CD players |
| Three CD players | Four CD players | |
|
|
| Three Cassette Decks | One Rhythm Synth |
|
|
|
| One Cassette Deck |
|
|
| ||
Please observe |
| Do not connect any audio source with a HIGH LEVEL OUTPUT to the | ||
| LOW LEVEL PHONO 1 or PHONO 2 mixer audio input jacks (an audio | |||
the following: |
| source output with a volume control is HIGH LEVEL). | ||
|
|
|
|
|
Connecting Microphones
Microphone 1. Connect a balanced/unbalanced low impedance (600 Ohm) XLR type MIC OR a low impedance MIC with a 1/4” plug to the MIC 1 jack in the upper left corner of the mixer control panel.
Use 1/4” or
MIC 1
Microphone 2. Connect a high quality balanced/unbalanced low impedance (600 Ohm) microphone with a 1/4” plug to the MIC 2 jack on the lower left corner of the mixer’s back panel.
MIC 2
Use 1/4” jack
4 – Pyle Pro Mixer Owner’s Manual | 5 – Pyle Pro Mixer Owner’s Manual |
