Q-Logic 59238-02 A Secure the HyperStack Cables, Confirm HyperStack Operation

Installation Guide HyperStack Cable 9000 Series Stackable Chassis Switch

Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com

Secure the HyperStack Cables

Secure the cables in place using ties wraps as

shown. Secure the outer cables to the rack

posts; secure the inner cables to each other. This

reduces cable clearance to 7–8 inches and

provides room for the removal of the Power

Supply and Fan blades on the lower switch.

1. Tie Wraps

Confirm HyperStack Operation

Confirm that the ICC port Logged-In LEDs on all

CPU blades are illuminated. This indicates that

the switches are communicating.

1. Logged-In LEDs

Enter the Show Interconnect command to

confirm each ICC port is online.

Switch #> show interconnect

Blade ID ICC ID State LSDB ID ISOREASON

-------- ------ ----- ------- ---------

CPU0 ICC0 Online 0x1000 NotApplicable

ICC1 Online 0x1001 NotApplicable

CPU1 ICC0 Online 0x1010 NotApplicable

ICC1 Online 0x1011 NotApplicable

Enter the Show Fabric

command to confirm that

both QLogic 9000 Series

switches are in the fabric.

Switch #> show fabric

Domain WWN Enet IP Addr FC IP Addr SymbolicName

------ --- ------------ ---------- ------------

*1 (0x01) 10:00:00:c0:dd:07:4a:e8 10.20.83.203 0.0.0.0 QLogic 9000

2 (0x02) 10:00:00:c0:dd:00:6a:2d 10.20.68.12 0.0.0.0 QLogic 9000

* indicates principal switch

marks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to

be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product

design or specifications.