QSD004 User’s Manual

5.15 Video Mode

Select NTSC or PAL video source.

5.16 Factory Reset

Press [SEL] button to reload factory defaults, then the DVR will reboot, all custom settings (including password) will be restore to factory default.

Caution: There is no confirming dialog box for this selection after you

press [SEL] button, please be patient!

If you forget your password, please keep the system on main screen, and then press [Pause] button ten (10) times, the DVR will reset the system. Then the default password will be: [CH1] button six (6) times.

If the DVR is recording, please unplug the power supply and uninstall the HDD, then connect power to boot DVR and press [Pause] button for ten (10) times.

Chapter 6: Recording

6.1 Start Recording

Press [REC] to start recording (as set in 5.7 Schedule Set).

DVR will display system information on screen.

10% 1

2

R

R

3

12

3 4

R

R

4

5

6

7

8

EACH REC [M] (T) 2008/07/01 16:22:30

- 12 -

Page 15
Image 15
Q-See QSD004 manual Video Mode, Factory Reset, Start Recording