Basic operation guide
3.1 How to start the DVR
Attention: Before powering on the machine, please make sure the power input (110V/220V) of DVR matches the local power supply, if not, please move the red flip switch on the rear panel to the correct input.
If the power indicator light is off, please do the following:
If the DVR is not connected to the AC source, please connect it. The DVR should power up immediately. However, if the problem remains, please move to the next step.
Switch on the power supply in the back panel, the DVR should start.
The power indicator light is on DVR is powered on, and the word — “Loading……” appears on the screen.
That indicates the DVR is initializing and will enter the live preview soon.
A password is required to access to the menu, you can not enter the next level menu until you type in The correct password. In order to avoid password being seen, the password you input is displayed as “*” while you are inputting the password.
Only the administrator, accessing the menu with the administrator password can setup and modify the configuration, and change the administrator password and normal user password.
Normal user can view the live image and playback records by inputting normal user password when
Page 30
