about two minutes to update.
When the erase, blank check and update are done, system will check the new program which has been written.
After the program check is done, the system will restart.
NETWORK UPDATE: The update information is also available on the network, to choose this option
Server IP: The IP address of the network where the firmware is.
File name: The file name of the firmware.
After filling in the two options above, move cursor to “UPDATE”, press “ENTER” button to begin update from network. The DVR will restart when the software update completed the same as USB update that.
Attention: Please make sure the IP address and the file name are correct.
DEFAULT SETUP: recover the origin configuration setup.
3.2.2
SEQUENCE DWELL FULL: Setup the time period between single channel switching, there are 9 options for users, from 0 second to 9 seconds.
SEQUENCE DWELL QUAD: Setup the time period of
Page 39
