Manuals / QSC Audio / Baby / Monitor

QSC Audio 522ua manual Example #1 QSControl.net X-over mode

Models: 522ua

1 28
Download 28 pages 59.56 Kb
Page 6
Image 6

Third, the RAVE 522ua and QSControl.net system are targeted at network switch deployments. The consumer costs of Ethernet switches have continued to fall over the last several years and are now comparable with repeaters on a per port basis. In addition, the sophistication and scalability of network switches make them ideal for new installations. However, we do realize that designers may wish to add RAVE products to existing audio network installations that are built on repeater LAN topologies. This applies primarily to existing CM16a and RAVE networks. For this very reason we continue to support connectivity to network repeater hardware with the RAVE 522ua. Support for network repeaters exists only with the Two Wire Interface. That is to say that the QSControl port and the CobraNet port must be connected to separate repeater LANs. Even when properly configured, audio channel capacity is severely lim- ited and both audio and control network expansion is limited by the respective capacity of each segment. In other words, scalability ceases to exist when bandwidth demands on the QSControl.net segment approach 10 Mbps and demand on the CobraNet segment approaches 100 Mbps. Obviously, we recommend taking advantage of switch network technology whenever possible.

It should be noted here that while the CobraNet port on a RAVE 522ua is restricted to repeater LAN or switch LAN deployments, QSControl.net is a TCP/IP standards-compliant network system and therefore supports operation on network repeaters, switches and routers. When implementing the Two Wire Interface, the QSControl.net segment does not require a single topology data path and therefore repeaters, switches and routers may be assembled on the LAN in a hybrid fashion.

To learn more about network design rules and system compliance visit the QSC network resources page at http://www.qscaudio.com/ products/network/resources.htm. To learn more about CobraNet design requirements and to obtain the CobraCAD system design utility visit the Peak Audio website at http://www.peakaudio.com/CobraNet/Network_Design.html.

All of this may seem daunting if you are new to networking. However, it all boils down to connecting a few simple cables between var- ious networking devices. Most of the time it "just works". QSC helped pioneer CobraNet with our RAVE ™ products and there are hun- dreds of installations all over the world, in theme parks, hotels, stadiums - everywhere. They run hum-free, sound great and are very reliable.

The following examples will help get you started, but they just scratch the surface of what can be achieved with advanced network- ing…

Example #1 - QSControl.net X-over mode:

This is the simplest connection you can make between the RAVE 522ua and your computer. Use a CAT-5 crossover cable connected between the RAVE QSControl port and your computer's Network Interface Card, (NIC). No network switch is required. With QSCon- trol.net server and client software installed and running on your computer you will be able to completely set up your RAVE 522ua.

6

Page 5 Page 7
Page 6
Image 6
QSC Audio 522ua manual Example #1 QSControl.net X-over mode
Page 5 Page 7

522ua specifications

The QSC Audio 522ua is a cutting-edge amplifier designed to meet the demands of professional audio environments. This versatile 2-channel amplifier delivers a robust performance, making it an ideal choice for installations in various settings such as auditoriums, theaters, and multi-purpose venues.

One of the standout features of the 522ua is its exceptional power output. With a continuous output of 250 watts per channel at 4 ohms, it ensures that audio signals are delivered with clarity and strength. This amplifier is built to handle both low and high impedance loads, providing flexibility for different speaker configurations. What’s more, its dynamic power capabilities allow for peaks up to 450 watts, ensuring that even the most demanding audio content is reproduced with stunning accuracy.

At the heart of the QSC 522ua is the innovative PowerLight technology, which combines efficiency and performance. This technology not only contributes to reduced power consumption but also results in lower operating temperatures, enhancing the reliability and longevity of the amplifier. The compact design of the 522ua ensures it can fit into tight spaces while still providing ample power, catering to the needs of various installations.

Another important feature is the integrated DSP (Digital Signal Processing), which allows users to fine-tune audio output for optimal performance. The DSP includes functions such as equalization, delay, and crossover settings, enabling precise control over sound reproduction. The intuitive user interface, along with the LCD display, makes navigating through the amplifier's features and settings seamless.

Moreover, the 522ua is equipped with advanced protection circuitry that safeguards the amplifier against thermal overload, short circuits, and other potential issues. This reliability ensures uninterrupted performance during critical audio tasks.

In addition, the amplifier's network capabilities allow for remote monitoring and control through the QSC Q-SYS platform or other compatible systems, integrating it easily into modern audio networks. With its combination of power, reliability, and advanced technology, the QSC Audio 522ua stands out as an outstanding amplifier option for professional audio applications. Whether for live performance, installation, or broadcast, it delivers unmatched performance that audio professionals have come to trust.