Manuals / QSC Audio / Baby / Monitor

QSC Audio 522ua Utility/Diagnostic Functions, Safe Mode Switch, RS-232 Serial Port I/O Interface

Models: 522ua

1 28
Download 28 pages 59.56 Kb
Page 21
Image 21

Utility/Diagnostic Functions

Safe Mode Switch

Location of Safe Mode switch: The front panel has a small access hole on the left side, just left of the Power indicator. It is not labeled to help prevent accidental use. The Safe Mode switch can be operated by using a paperclip (or similar item) inserted into the access hole and pushing.

Safe Mode: Use if the RAVE 522ua becomes inoperable (or behaves in completely unexpected ways) after updating firmware.

If the RAVE 522ua operates in an unexpected way or is not responding to any communications after a new firmware file is uploaded to it, it is likely the file was corrupted during transfer. If this occurs, there is a “backup” program in the RAVE 522ua that will enable you to communicate with it.

How to put the RAVE 522ua into Safe Mode:

1- Turn off the power to the RAVE 522ua by unplugging it from the AC outlet.

2- Depress the Safe Mode switch and keep it depressed while plugging the unit back in (power on).

3- The RAVE 522ua is now in “safe mode”. You may release the switch.

You should now be able to re-establish limited TCP/IP communications with the RAVE 522ua. Once communication has been re- established, the file transfer can be tried again or the old application file used until the source of the data transfer problem can be found. Also, QSControl.net WILL NOT communicate with the RAVE 522ua if it is in “safe mode”. You may communicate only using TFTP, Telnet, or RS-232.

RS-232 Serial Port I/O Interface

The RS-232 connector on the rear panel is used as a serial port input/output (I/O). This I/O port is used for accessing Ethernet/IP settings, stand alone control capabilities, system “health” data, firmware version information and other related data.

Should any system problems arise, the data that may be accessed through this interface can help to track down the problem. The most common items that might be used are “Display Network Settings” and “Enter Network Setup”. Many of the remaining selec- tions would typically be used for troubleshooting purposes along with a QSC technical representative prompting you to access par- ticular menu items so the data can be interpreted.

Connection is made using a normal serial cable between your computer’s serial port and the RS-232 port of the RAVE 522ua. Once properly connected, a “dumb-terminal” program (such as Hyper Terminal, a widely used version on most Windows-based PC’s) is started and communication established between the PC and the RAVE 522ua.

Following is the basic procedure for starting up Hyper Terminal, naming the connection, specifying the communications settings and an example of “what you should see” for a text-menu once the communications link has been established. If programs other than Hyper Terminal are used, you will need to follow your software’s instructions for establishing communications through your PC’s COM (serial) port.

21

Page 20 Page 22
Page 21
Image 21
QSC Audio 522ua manual Utility/Diagnostic Functions, Safe Mode Switch, RS-232 Serial Port I/O Interface
Page 20 Page 22

522ua specifications

The QSC Audio 522ua is a cutting-edge amplifier designed to meet the demands of professional audio environments. This versatile 2-channel amplifier delivers a robust performance, making it an ideal choice for installations in various settings such as auditoriums, theaters, and multi-purpose venues.

One of the standout features of the 522ua is its exceptional power output. With a continuous output of 250 watts per channel at 4 ohms, it ensures that audio signals are delivered with clarity and strength. This amplifier is built to handle both low and high impedance loads, providing flexibility for different speaker configurations. What’s more, its dynamic power capabilities allow for peaks up to 450 watts, ensuring that even the most demanding audio content is reproduced with stunning accuracy.

At the heart of the QSC 522ua is the innovative PowerLight technology, which combines efficiency and performance. This technology not only contributes to reduced power consumption but also results in lower operating temperatures, enhancing the reliability and longevity of the amplifier. The compact design of the 522ua ensures it can fit into tight spaces while still providing ample power, catering to the needs of various installations.

Another important feature is the integrated DSP (Digital Signal Processing), which allows users to fine-tune audio output for optimal performance. The DSP includes functions such as equalization, delay, and crossover settings, enabling precise control over sound reproduction. The intuitive user interface, along with the LCD display, makes navigating through the amplifier's features and settings seamless.

Moreover, the 522ua is equipped with advanced protection circuitry that safeguards the amplifier against thermal overload, short circuits, and other potential issues. This reliability ensures uninterrupted performance during critical audio tasks.

In addition, the amplifier's network capabilities allow for remote monitoring and control through the QSC Q-SYS platform or other compatible systems, integrating it easily into modern audio networks. With its combination of power, reliability, and advanced technology, the QSC Audio 522ua stands out as an outstanding amplifier option for professional audio applications. Whether for live performance, installation, or broadcast, it delivers unmatched performance that audio professionals have come to trust.