Section 3: Operation- Telnet Access
The features outlined for the
The Telnet “session” is a standard Windows program. Consult Windows documentation for information reagrding the specifics of Telnet. It is a very
This is the basic procedure for opening a Telnet session:
1- To open the Telnet program. Click START, select RUN, type TELNET in the text box & click OK.The blank Telnet screen should look similar to the example to the right.
2- Click on the “Connect” menu header; the drop down menu items will appear. Choose the “Remote System” option.
3- The “Connect” window then opens. You will need to enter the IP address of the CM16a that you want to communicate with. Determine the IP address of the specific CM16a and enter it in the Host Name: field ( the numbers in the screen- shot to the right are EXAMPLE ONLY!). Enter the address in four numeric groups seperated by periods. (NOTE: Port: & Term Type: settings must be as shown)
4- Click on the “Connect” button. If the address entered was correct and network communications with the CM16a are successful, the Telnet session should open as shown below. The IP address number that appears at the top of the window will be different than shown; it will match the IP address that you entered for the CM16a that you are communicating with.
5- Now you have the same options that are available in the Serial Port I/O
30
