QSC Audio I-82H, I-YM8 Connection, NL4 to NL4 Wiring two- and four-conductorcables, To Amplifier

Connection

The I-82H has two Speakon® NL4-type connectors wired for full range, passive operation. Connect the amplifier’s + and - outputs directly to the Speakon’s 1+ and 1- terminals.

The two connectors are wired in parallel to make parallel cabinet connection easy. Your amplifier must be able to safely power the lower impedance of parallel-connected loudspeakers.

EN	NL4 to NL4 Wiring (two- and four-conductor cables)
	Two- or four-conductor cable may be used for Speakon to Speakon
	connections. Four-conductor cable can be used, but the extra con-
	ductors do not carry signal.
	To Amplifier

Banana to NL4 Wiring

To Amplifier

1/4” Phone to NL4

To Amplifier

The I-82H is not wired for biamp oper- ation. Do not connect biamplified equipment to the I-82H.

To Loudspeaker

To Loudspeaker

To Loudspeaker

Maintain proper speaker and amplifier connection polarity throughout the entire system. All positive-marked loudspeaker terminals should be connected to positive-marked amplifier output terminals. This will provide the best possible low-frequency output from your system.

4