Balanced Inputs: Connect to the plug as shown.
1 | = Shield (ground) |
|
3 | = Minus | Ground |
2 | = Plus (+) | Inverting Input |
Unbalanced Inputs: Connect to the plug as shown. If a 3 conductor (TRS) plug is used to connect an unbalanced source, Pin 3 and pin 1 must be connected with a jumper as shown.
1 = Shield (ground)
3 = Minus
2 = Plus (+)
Input Connections
KSub
Channel A Line Input
Combination
and 1/4" Phone Jack
Channel B Line Input
Combination
and 1/4" Phone Jack
Green Signal
Present LED
Channel A and B Mixed Gain Knob
The KSub is designed to accept Line Level inputs connected either by male XLR or 1/4" phone (TS or TRS) jack. If signal is connected to both Channel A and Channel B, they will be summed together. The gain of the summed signal is then controlled using the Gain knob. This affects the amount of signal sent to the amplifier and then to the loudspeaker components. The green SIGNAL LED will illuminate when signal is present, regardless of the amount of gain as set by the Gain knob. If the LED does not illuminate, the input is not receiving any signal, or the level of the signal is significantly low. Check all connections and the status of the device delivering the signal.
11
