How to Allow Easy Access to the ATS Display Interface
The ATS comes with a Plexiglas cover plate that can be installed in the front door to protect against access to the display interface. When installed, access to the interface requires opening the front door.
To attach the cover plate, peel off the paper strips on the top and bottom of the plate to expose the adhesive. Press the plate into place from inside the door.
To remove the cover plate and gain ready access to the display interface, open the front door and press firmly on the plate from outside the door as shown below. You may need to use a screwdriver or other flat tool to pry the plate away from the inside of the door.
InfraStruXure Power Generation System | 67 |
