American Power Conversion 250 A manual Front view, door open

Smart Distribution Panel with ATS

Front view, door open

 Remove the dead front to
obtain access to the panel
board for maintenance and	
wiring.
 The Source 1 motorized	
switch (see “Motorized
switches” on page 15)
controls operation of the	
Source 1 input switch.

The automatic operation

control panel is used to set	
the generator to automatic	
operation or, alternatively, to
remove the generator from
automatic operation (see
“Automatic operation control
panel” on page 16).	
 The Source 1 lamp lights	
green when the Source 1
switch is ON (closed).	
 The display interface
provides a local interface for	
viewing status data,
configuring settings, and	pg0010c
operating the ATS. The
display interface has an LCD,
a five-button panel,

basic status lights, and a beeper (see “Display Interface” on page 29 for detailed information about the contents and operation of each screen).

The sub-feed output breakers provide power to equipment in the data center (see page 68 for detailed information about installing these breakers).

The Source 2 lamp lights green when the Source 2 switch is ON (closed).

The Source 2 motorized switch (see “Motorized switches” on page 15) controls operation of the Source 2 input switch.

Use the latches to open the dead front.

12 InfraStruXure Power Generation System