American Power Conversion 250 A manual Parts and tools needed for installation procedures

How to Add Sub-Feed Output Distribution Circuit Breakers to the ATS

Parts and tools needed for installation procedures

All assembly parts needed for installation procedures are included with the circuit breaker kits.

Tools required	T1 three-pole breaker assembly
Phillips screwdriver	T1 three-pole
	adapter module
	T1 three-pole breakers

Allen wrench

M4×70 screws and washers

T25 Torx driver Breaker brackets

M6 x 12 Torx screws

M4×70 screws and washers

T1 single-pole breaker assembly	T3 three-pole breaker assembly
T1 single-pole	T3 three-pole
adapter module	adapter module
T1 single-pole breakers	T3 three-pole breakers
M3×75 screws, washers and retainers
Breaker brackets	M4×70 screws and washers
	Breaker brackets
M6×12 Torx screws
M4×15 screws and washers	M6 x 12 Torx screws
	M4×70 screws and washers

InfraStruXure Power Generation System 73