ATS Component Details
Motorized switches
|
| The operating lever indicates the present |
| | position of the motorized switch [OFF (), |
|
| TRIP, or ON ()]. This lever is also used |
|
| during manual operation of the switch (see |
|
| “Emergency Manual Operation” on page 22 |
|
| for proper operating procedures). |
|
| The on/off selector allows the operator to |
|
| choose whether or not the motorized switch |
|
| controls the input switch. The selector should |
|
| only be used for the purpose of implementing |
| | emergency manual operation (see page 21 for |
| | more information). |
|
| Pressing the trip button immediately trips the |
|
| motorized switch. If this button is pressed |
| | during automatic operation, the operating |
| lever will move to the OFF () position. | |
|
| |
|
| WARNING: Do not press this button while |
|
| load is connected! |
When the motorized switch is in the OFF () position, attach a
The operating lever key is used during manual operation of the motorized switch to assist in turning the operating lever. The key is provided in the hardware bag with the ATS.
Before operating the motorized switches, review “Emergency Manual Operation” on page 22. Failure to follow proper procedures could cause personal injury or
D A N G ER damage to the equipment.
InfraStruXure Power Generation System | 15 |
