American Power Conversion 250 A Electrical Config, Factory Defaults, Manufacturer Data, System ID

Config

Electrical Config

The following items are available on this menu:

Voltage	Specifies the input voltage rating of the ATS.
Switch Rating	Specifies the amperage rating of the ATS.
Frequency	Specifies the frequency rating of the ATS.
DC Backup	Specifies whether or not the ATS monitoring unit is receiving back-up power from
	the generator battery.

Factory Defaults

Use this option on the Config screen to reset all ATS settings to their factory default values.

Manufacturer Data

Use this option on the Config screen to display a scrollable list containing information about the ATS. This information is useful when requesting service or product updates. The following information is displayed:

• Manufacturer Name	• Firmware Revision
• Date of Manufacture	• Serial Number
• Date of Calibration	• Model Number
• Hardware Revision

System ID

The following items are available on this menu:

System Name	Set a unique name for your InfraStruXure Power Generation System.
Location	Specify the physical location of the system in relation to your data center.
Contact	Identify the person to notify concerning questions or problems with regard to the
	system.

Firmware Updates

Use this option on the Config screen to download updated firmware to the ATS.

Reset 100% Fuel Level

Use this option after the generator’s tank has been filled to reset the ATS to acknowledge a 100-percent fuel level. The ATS can now begin calculating accurate fuel-consumption rates and run-time information.

InfraStruXure Power Generation System 47