Total Power Off

3.Set the Source 2 switch to OFF ():

a.Set the selector on the Source 2 switch to Manual.

The operating lever will swing out when the selector is set to Manual.

b.Turn the Source 2 switch counterclockwise to OFF (). Use the operating lever key for easier operation.

4. Set the main Source 1 circuit breaker to OFF ().

5.Set the main Source 2 circuit breaker to OFF (). If Source 2 is a generator, set the generator control switch to OFF (). If OFF is not an option, set the generator control switch to Manual.

28

InfraStruXure Power Generation System

Page 38
Image 38
American Power Conversion 250 A manual Total Power Off