Accessories, Install the Front Face | Quadra-Fire QV26E-B specs

5Accessories

A. Install the Front Face

Install the front face following the instructions packaged with the face.

B. Install other Optional Accessories

Installation of other optional accessories may be done at this time.

The heater is now ready for operation. See Section 7.

WARNING

Shock Risk

Do NOT operate this heater without the front face installed.

Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05

13

Image 13

Quadra-Fire QV26E-B owner manual Install the Front Face, Install other Optional Accessories

Contents

QV26E-B Listing Label Information/Location Homeowner Reference Information Table of Contents Not intended for use as a primary heat source Important InstructionsFire Risk Tools and Supplies Needed Getting Started Selecting Heater Location Framing and ClearancesClearances Electrocution Risk Heater Locations Model # Framing the Heater Frame the Heater As a Fireplace InstallationShock Risk Shock Risk Fire Risk As an Insert Pre-installation Preparation Wiring Orange 3 PIN Install the Front Face AccessoriesInstall other Optional Accessories Finishing Finishing ChecklistFinishing Material Mantel Operating Instructions Main Power SwitchThermostat Troubleshooting Guide Troubleshooting Access the Firebox Maintenance and ServiceClean the Firebox Compartment Clean the Back Acrylic Panel When cleaning glass door Maintenance Task List Reference Materials Heater Dimensions PBT = Polished Brass Trim Optional ComponentsSST = Stainless Steel Trim Model Description Width Height Fronts QV26E-B Service Parts 23/26 Log Assembly Hearth AssemblyThermostat Control Assembly # Description of Part This page intentionally left blank How to Obtain Service Limited Warranty Hearth & Home Technologies Inc North Highway Colville, WA Contact Information