Clearances | Quadra-Fire QVI-25FB-S specification

B. Clearances

WARNING

Fire Risk.

Odor Risk.

• Clearance to combustible material under the insert is 1/4 inch (0.6 cm).

•Use leveling legs to raise insert minimum 1/4 inch above combustible material or outer wrap of factory built ﬁrebox.

WARNING

Fire Risk.

• Locate and install appliance to all clearance speciﬁcations in manual.

MANTEL

12 in. MAX.

12 in. MAX.

TOP OF UNIT

Figure 3.2 Clearances to Mantels or other Combustibles above Appliance

Quadra-Fire • QVI-25FB-S • 2031-910 Rev. D • 3/08

7

Image 7

Quadra-Fire QVI-25FB-S owner manual Clearances to Mantels or other Combustibles above Appliance

Contents

What to do if you smell gas ModelHOT Surfaces Xxxxxxxx Homeowner Reference Information Table of Contents Listing and Code Approvals Tools and Supplies Needed Design and Installation ConsiderationsGetting Started Inspect Appliance and Components Minimum Fireplace Opening Fireplace Size Requirements Clearances to Mantels or other Combustibles above Appliance Clearances Vent Termination Minimum Clearances Termination Locations Measuring Standards Vent Information and DiagramsVent Table Key Horizontal Venting Installation Preparation Connecting Vent Pipe Installing Vent Pipe and ApplianceVenting Components Locking TAB Handle Placing, Securing and Leveling the Appliance Damper Flashing Kit Optional Installing Adaptor and Termination CapMasonry Factory Built Wood Burning Fuel Conversions Gas Connection Gas InformationGas Pressures Check for GAS Leaks High Altitude Installations Appliance Requirements Wiring the ApplianceON/OFF Switch Electrical Information Installation for Fan Optional Junction Box InstallationOptional Accessories Fan Wiring Diagram Mantel Projections Finishing Ember Placement Appliance SetupClean the Appliance Accessories Log Placement Log Set Assembly LOGS-2031Positioning the Logs Quadra-Fire QVI-25FB-S 2031-910 Rev. D 3/08 Replacing Glass Assembly Glass AssemblyAir Shutter Setting Removing Glass Assembly Before Lighting Appliance Operating InstructionsBefore operating this appliance have a qualified technician Standing Pilot Ignition Lighting ApplianceWhat to do if YOU Smell GAS After Appliance is Lit Initial Break-in ProcedurePilot Adjustment Check Pilot Flame Appearance Issue Solutions Frequently Asked Questions Symptom Possible Causes Corrective Action TroubleshootingStanding Pilot Ignition System Symptom Possible Cause Corrective Action Troubleshooting Maintaining and Servicing Appliance Maintenance Tasks Doors, Surrounds Inspect Maintenance Tasks QVI-25FB-S Model Dimensions Appliance Dimension DiagramReference Materials Direct Vent Flex Liner Kits Vent Kits Components Part number list on following Log Set AssemblyService Parts List 119 1312 Stocked Service PartsAt Depot Valve Assembly Limited Lifetime Warranty Lifetime Warranty Contact Information