Quadra-Fire QVI35S Log Set Assembly LOGS-QVI30, F. Positioning the Logs, Pilot Burner Basepan

F. Positioning the Logs Log Set Assembly: LOGS-QVI30

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

CAUTION: Logs are fragile! Carefully remove the logs from the packaging.

		1
4	6	5	7
	2		3

PILOT BURNER BASEPAN

1

1

Log #1 SRV340-701): Place log #1 in the back on the insert. Locate the legs of the log outside the 3/8” tabs to either side of the burner. Pull the log forward until the log is stopped by the back edge of the burner. The log should be centered.

340-935 2/02

22 Quadra-Fire • QVI30S, QVI35S • 340-901 Rev. i • 6/09