Quadra-Fire QVI30S E. Refractory Placement, MODELS Supreme-XT, Grand-XT, QVI30, QVI35, ADI60

E. Refractory Placement	Refractory Placement
	MODELS: Supreme-XT, Grand-XT,
CAUTION: Refractory is fragile! Carefully remove the	QVI30, QVI35, ADI60
refractory from the packaging.

Note: Refractory patterns and colors vary and may be different from the ones represented in the instructions.

Step 1: Place the back wall refractory against the back wall of the unit. The cut-out will be over the pilot and air intake hole. On some models the refractory will be behind the pilot bracket (see Figure 11.2).

Step 2: While holding the back wall in place, install the right side refractory. Bend down the small tab located on the top front edge of the firebox (see Figure 11.3).

Figure 11.3

Step 3: Install the left side refractory in the same manner (see Figure 11.4).

Figure 11.2

Figure 11.4

340-945B 6/02

Quadra-Fire • QVI30S, QVI35S • 340-901 Rev. i • 6/09 21