Quantum Audio 3A Series quick start Taking ESD Precautions

SuperLoader 3A Series

Taking ESD Precautions

Some components within the autoloader contain static-sensitive parts. To avoid damaging these parts while performing installation procedures, always observe the following precautions:

•Ensure that the work area is free from conditions that could cause electrostatic discharge (ESD).

•Discharge static electricity from your body by touching a known grounded surface, such as your computer's metal chassis.

•Keep the autoloader turned off during all installation procedures.

•Use an antistatic wrist strap.

•Keep static-sensitive parts in their original shipping containers until ready for installation. Look for the ESD sticker to identify static sensitive parts.

•Avoid touching connectors and other components.

Note: Dry climates and cold-weather heating environments have lower relative humidity and are more likely to produce static electricity.

Preparing for Rack Mounting

The autoloader can be rack mounted by attaching it directly to stationary cabinet rails. Take the following general safety steps before beginning the rack-mount installation.

1Lower the cabinet feet.

2Extend the cabinet anti-tip device, if available.

Note: An anti-tip device may be extendable legs or similar equipment used to stabilize the cabinet. This anti-tip equipment is to help avoid over- balancing the cabinet when installing or removing equipment.

3Ensure that the cabinet and all rack mounted equipment have a reliable ground connection.

4Verify that the total current of all rack mounted components (including the autoloader) will not exceed the current rating of the power distribution unit or outlet receptacles.

5Secure the help of at least one other person. At least two people are required to safely install the autoloader into a rack cabinet.

Warning: Failure to take these safety steps may result in personal injury or equipment damage.

Preparing for the Installation 3