Quatech DSCLP/SSCLP-100 for legacy applicattions which cannot, request baud rates over 115,200

		for legacy applicattions which cannot
		request baud rates over 115,200
		The X4 clock mode locks the ports
		hardware clock at four times the
		standard rate. The baud rate the port
X4	460,800	runs at will always be four times the rate
		requested by the application. This mode
		is useful for legacy applications which
		cannot request baud rates over 115.200.
		The X8 clock mode locks the ports
		hardware clock at eight times the
		standard rate. The baud rate the port
X8	921,600	runs at will always be eight times the
		rate requested by the application. This
		mode is useful for legacy applications
		which cannot request baud rates over
		115.200.

6.Double click the hardware class Ports (Com and LPT). Each Quatech PCI Serial Port listed in this class is a “child device” of the DSCLP-100 “parent device.”

7.Open the Properties dialog for a COM port, then click the Port Properties tab to view the settings for that port.

26 DSCLP/SSCLP-100 User's Manual