Manuals / Quatech / Computer Equipment / Network Card

Quatech DSCLP/SSCLP-100 user manual

Models: DSCLP/SSCLP-100

1 38

Download 38 pages 61.62 Kb

Page 19

$You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click "OK" anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory.$

NOTE:

You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click "OK" anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory.

9.The "New Hardware Found" dialog will repeat for each of the serial ports on the DSCLP-100 as each port is registered with Windows 95.

10.Installation is complete.

19	DSCLP/SSCLP-100 User's Manual

Image 19

Quatech DSCLP/SSCLP-100 user manual

Contents

for PCI bus DSCLP/SSCLP-100Users Manual Two Channel Low Profile RS-232 Asynchronous Communications AdapterDSCLP-100 or SSCLP-100 WARRANTY INFORMATIONDATE OF PURCHASE MODEL NUMBERor registered trademarks are property of their respective owners Application of Council Directive Declaration of ConformityManufacturers Name Manufacturers Address4 Address Map and Special Registers 5 Windows Configurations1 General Information 2.1 Factory Default Configuration 2 Hardware Configuration2.2 Enable Scratchpad Register SPAD, J2 2.3 Force High-Speed UART Clock X2 or X4, J4-J5 Clock multiplier 3 Hardware Installationscratchpad select Port 4 Address Map and Special RegistersI/O Address Range SPAD Jumper 4.2 Enabling the Special Registers4.3 Interrupt Status Register DLAB BitDescription 4.4 Options Register4.4.1 Enhanced Serial Adapter Identification NameMultiplier Clock RateUART Clock Maximum Data5.1 Windows Millennium 5 Windows Configurations5.2 Windows 5.3 Windows 5.4 Windows 5.5 Using the New Hardware Found Wizard You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click OK anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory 5.6 Viewing Resources with Device Manager DSCLP/SSCLP-100 Users Manual Figure 12--- Windows Device ManagerDSCLP/SSCLP-100 Users Manual Figure 13 --- Windows Device ManagerDual-Port RS-232 Serial Adapter 5.6.1 Changing Resource Settings with Device ManagerDSCLP/SSCLP-100 Users Manual Max bps Auto clock mode enables applications toData Rate Multiplier Clock Modehardware clock at four times the for legacy applicattions which cannotrequest baud rates over 115,200 The X4 clock mode locks the portsDSCLP/SSCLP-100 Users Manual DSCLP/SSCLP-100 Users Manual 6.3 DOS and other operating systems 6 Other Operating Systems6.1 Windows NT 6.2 OS/2cannot be used to make changes 6.3.1 QTPCI.EXEDSCLP/SSCLP-100 Users Manual Figure 15 --- QTPCI.EXE Expert Mode display7 External Connections Port SignalRS-232 Port8 PCI Resource Map 9 Specifications trans Data RateMaximum Load pF kbaudComputer will not boot up 10 TroubleshootingCannot communicate with other equipment DSCLP/SSCLP-100 Users Manual Revision November P/N