Installing the PC Compatibility Card hardware

There are several steps to installing your PC Compatibility Card hardware:

mopening the computer

mdisconnecting the CD-ROM audio cable

mopening the expansion card cover and chassis

minserting the PC Compatibility Card

mconnecting the Sound Out cable

mconnecting the CD In cable to the card

mreplacing the chassis and expansion card cover

mconnecting the CD In cable to the CD-ROM drive

mreplacing the computer cover

Opening the computer

1Shut down the computer and disconnect all cables from the computer, except for the power cord.

Leave the computer plugged in for now, to ground it and protect its components from static electricity damage.

2If the security bar is installed, remove it by removing the screw under the front panel and pressing the center of the bar.

First, remove the screw.

Then press the security bar near its center to release it from the computer.

Reinstalling the PC Compatibility Card in Your Power Macintosh 7300 Computer

101

Page 101
Image 101
Apple 4400, 7300 manual Installing the PC Compatibility Card hardware, Opening the computer