Manuals / Apple / Computer Equipment / Personal Computer

Apple 4400, 7300 manual 129

Models: 7300 4400

1 187

Download 187 pages 3.61 Kb

Page 129

Otherwise, make a note of where the audio cables are connected so you’ll know where to reconnect them later. Then grasp the side of each plug and pull firmly. Be sure to pull the plug, not the cable. It may help to gently rock the plug from side to side as you pull.

IMPORTANT Do not pull on or move the cables themselves. They are routed under the chassis in a specific way.

Gently rock	Don’t pull on
the plug.	the cable.

Do not attempt to use pliers to remove these plugs; you may damage the plugs or your card.

4If you have installed a PC Serial and Parallel Card, unplug the peripheral flex cable (the cable that connects the two cards) from your PC Compatibility Card.

5Grasp the PC Compatibility Card by its sides (without touching any components on the card) and pull it straight out of the slot.

IMPORTANT Do not rock the card side to side as you remove it. Doing so may break the card or damage the slot.

Adding Memory to Your PC Compatibility Card

129

Image 129

Apple 4400, 7300 manual 129

Contents

Connecting Monitors and Other Equipment Using the loopback cable Connecting a monitor to your Power Macintosh Connecting a single monitor Connecting a monitor to your Power Macintosh Connecting two monitors Connecting two monitors to your Power Macintosh Loopback cable into Connecting an AppleVision monitor Connecting an AudioVision monitor Connecting a Midi device Connecting a pointing device Connecting a printer Connecting a PC game controller Connecting to a network Connecting a modem or other serial deviceConnecting a security dongle Page Installing the PC Compatibility Card Software Installing the Mac OS PC Compatibility software Software is automatically installed on your hard diskClick Install Name Location Creating a drive container PC Setup control panel appears Dialog box appearsChoose a location for the drive container New drive container is created You can type up to 31 characters Open the PC Setup control panel and click Switch to PC Installing Windows Installing the PC Compatibility Card Software To install the software, follow these steps Installing support software for WindowsIf necessary, switch to the PC environment Follow the instructions that appear on the screen Installing PC utilities Configuring network support in WindowsWhen installation is complete, restart the PC Installing keyboard files in Windows Installing QuickTime for Windows Installing Sound Blaster software for WindowsKeyboard files are located in the following directory Installing video software for Windows Installing your own PC software Setting Up the PC Environment About the PC Setup control panel Setting Up the PC Environment Using the PC Setup Control Strip module Configuring monitors You can switch to the Mac OS by typing x-Return Selecting and configuring monitors in Windows Choose this type in the Models box If this type is listed in PC Setup Restart Windows RAM information Setting printer options Setting up printing in the Mac OSOpen the Extensions folder inside the System Folder Chapter Choose an option under Interpret Print Data as Epson emulation and page setup options Chapter Epson font TrueType font Setup dialog box for the printer currently selected appears Select the desired page size and click OK Resetting the default printing preferences Spool Settings dialog box appears Setting up printing in the PC environmentProperties window for the printer you have selected appears Details page appears Properties window, click Port Settings Configure LPT Port dialog box appearsAdvanced PostScript Options dialog box appears Properties window, click the PostScript tab Click Advanced Close the Properties window Printing from Windows Saving a printer file Configuring PC soundYou can use three kinds of sound in the PC environment PC beep sounds Turning PC sound on and off Close the PC Setup control panel Creating a single partition/bootable drive container Configuring PC drives Creating a multiple partition/bootable drive container Click Create Assigning a drive to a PC-formatted hard disk Open the PC Setup control panel Using shared volumesChanging a drive assignment Click Restart PC Sharing files between the Mac OS and the PC To set up a shared volume, follow these steps Chapter Turning off volume sharing Setting up your PC on a networkIf you no longer want to share a volume, follow these steps Turning off automatic sharing Configuring the PC serial ports Setting up a modem or other serial device Building a custom cable Connecting a joystickDB-9 DB-25 RS-232 name HSKo HSKi Setting up your DOS configuration files Editing the CONFIG.SYS fileReplace it with this line Editing the AUTOEXEC.BAT file Setting the number of drive letters Working in the PC Environment Switching between the Mac OS and PC environments Switching with the PC Setup control panelTo switch back to the Mac OS, press x-Return Switching with a keyboard command Switching with the Control Strip To set a new hot key, follow these steps Turning the PC on and off in the Mac OS environment Turning the PC on and off with the PC Setup control panel Turning the PC on and off with the Control Strip Starting the PC automatically F10 F11 F12 F13 F14 F15 Lock Restarting the PC in the PC environment Restarting the PC from a floppy disk Using floppy disk drives and floppy disks Using a pointing device Using CD-ROM discs and drives PC key Macintosh keyboard equivalent Using keyboards Chapter Working in the PC Environment Transferring large bitmap images Using onscreen help in the PC environment Using PC files in the Mac OS environment Using shared folders and volumes Icon opens and you have access to the files inside it Finder, double-click the drive container to open itDouble-click the container’s disk icon Troubleshooting Starting up PC Setup icon has a red slash through it at startupMacintosh freezes during startup PC didn’t start up Troubleshooting There is a delay when switching between environments Switching to and from the PC My monitor flashes oddly when I switch environments Monitor problems Tried configuring my display and now it won’t work properly Troubleshooting My modem is not working correctly in Windows Problems using a modem Problems with files and disks Want my drive container to have more than one partitionCan’t share all the folders I want Shared folders don’t get updated in Windows Shared drive is still usableWant to change the size of my drive container Am unable to use Microsoft Backup Problems with information transfer Copying and pasting between environments isn’t workingTips for copying and pasting images Cannot open or save my files in a shared folder My system freezes when I am using ODI with Windows Communication and network problemsCan’t connect to a network in the PC environment My PC communications software doesn’t work Sound problems Configuration problemsCan’t assign a COM port to a Macintosh serial port Can’t hear PC sounds CD sound went away when I switched environments CONFIG.SYS for Windows 95 or WindowsCheck that the AUTOEXEC.BAT file contains this line AUTOEXEC.BAT for Windows Printing doesn’t work Printing problems Chapter Can’t print a test page in Windows Can’t configure my pointing device Other problemsPage What you need Removing the PC Compatibility Card hardware Disconnecting the cablesOpening the computer, expansion card cover, and chassis Be sure to pull the plugs, not the cables Remove any other cables from the PC Compatibility Card Installing the audio ribbon cable Installing the port access coverRemoving the card Replacing the computer’s coverPage Page PC Compatibility Card Audio cables for Scsi CD-ROM drives Opening the computer Installing the PC Compatibility Card hardware Release buttons Remove the cover from the computer Power supply case Disconnect the power cord Remove the power cord from the back of your computer Disconnect the audio ribbon cable from the CD-ROM drive Disconnecting the CD-ROM audio cable Opening the expansion card cover and chassis Support foot holds the computer’s chassis when you open itFlip open the expansion card cover Position the support foot You can use this tab to lift the top chassis Unlock the chassis release switches Support arm Prepare the first PCI expansion slot Inserting the PC Compatibility Card Insert the card Align the card with the first expansion slot Connecting the Sound Out cable 113 Connector labeled Revsndout on the PC Compatibility Card Processor card Connecting the CD In cable to the card 117 Replacing the chassis and expansion card cover Replace the support foot Lock the release switches Appendix B Connecting the CD In cable to the CD-ROM drive Make sure all connectors are firmly attached Two-inch gap Front of computer If you removed the security bar earlier, replace it now Reconnect all equipment Reinsert the power cable and all other equipment cablesPage Appendix C Adding Memory to Your PC Compatibility Card Removing the card Installing memory on the card involves the following stepsOpen the computer Remove any cables from the PC Compatibility Card ports 129 Handle the Dimm by its edges. Avoid touching the connectors Installing the new DimmRemove the Dimm from its static-proof bag Make sure the Dimm lever is in the open position Make sure the Dimm is snapped into place on both ends Reinstalling the card Appendix D Installing Network Client Software NetBEUI and IPX/SPX in Windows TCP/IP in Windows Installing NetWare client software version 1.02 for WindowsODI driver with the following protocols Ndis 2.0 driver with the following protocols To switch to the disk, type the following Error message isTo start the installation process, type the following List of network interface controller NIC drivers appears Computer must have a unique identity to access the network Select the Identification tabClick Start and choose Run from the menu that appears Dialog box that appears, type Your computer scans for other machines on the network Installing Client 32 for Windows Installing NetBEUI and IPX/SPX in WindowsInstalling TCP/IP in Windows Install NetWare Client version 1.02 for Windows Network Configuration dialog box appears Windows 95 will install all the necessary network components PROTOCOL.INI Installing Microsoft TCP/IP-32 IP protocol stack in Windows 143 Running the Network Protocol Setup Setnet utility Type the following Using a modem connected to the Macintosh serial port Installing a modem in Windows Enter the modem information and then click NextClick Finish Dial-up networking installation Making a PPP connection Page About video capabilities Appendix E Configuring Video Software Installing and configuring Mpeg video support Installing Mpeg video support in WindowsTo install the Mpeg video support, follow these steps Optimizing Mpeg playback in Windows To adjust CD-ROM caching settings, follow these steps Video mode tables To set ATI Mpeg Player properties, follow these stepsBits per pixel Dram accelerator mode MHz Depth bpp 640 x800 x MHz Depth bpp 1024 x 1152 x1280 x Vesa Bios Extension modes Maximum color Resolution Depth bppMinimum Dram MB Color depth bpp Resolution Fixed-frequency monitorsRefresh rate 68.7 kHz horizontal, 75.08 Hz vertical Refresh rate 49.7 kHz horizontal, 74.55 Hz vertical Refresh rate 60.2 kHz horizontal, 74.9 Hz vertical Refresh rate 35 kHz horizontal, 66.67 Hz vertical User-adjustable monitors Index PC Compatibility Card-PC Utilities DOS Index Index Index Index ADB Index Index Index Apple Publishing System Apple Computer, Inc PC Compatibility Card Apple Computer, Inc Contents Installing the PC Compatibility Card Software Working in the PC Environment Appendix a Removing the PC Compatibility Card From Your Troubleshooting 133 Appendix B Reinstalling the PC Compatibility Card in Your Index 151 Radio and television interference FCC declaration of conformity Vcci Class 2 statement Industry Canada statement Quick Start Port access cover Switch to the PC environment by pressing x-Return Getting startedStart up the Mac OS environment Follow the instructions on the screen to set up Windows